Dynamic Micro Tech

• High accurate temperature sensing by precise temperature sensor with pt-100 sensor
• Contact rating 30a at 230v ac for compressor live outputs 5a at 250v ac for alarm potential free outputs
• Temperature sensor high accuracy and stability pt-100 sensor.
• Resolution 1v for voltage, 1a for currents 0. 1 "c for temperature
• Set Key: to enter into function set mode / to view the next set point
• Up Arrow Key: to increment the set point
• Down Arrow Key: to decrements the set point
• Enter Key: to come out of function set mode /to enter into menu
• Mounting: wall mounting

The smart 6AC Power Controller has build in power on delay of 3 minute to re starting immediately after main supply failure. Whereas all air conditioners has built in thermostat, it senses the return air & due to the local parameters it cannot retain its accuracy & compressors run continuously resulting your room goes in lower temperature. This is wastage of energy when that cooling is not required. As per the ambience temperature energy saving will defer. Dynamic is built in digital cyclic timer which you can set hourly time to switch over one AC to another. This automation will help you out reduce wastage energy & manage operation activity as per choice.

Features:

• Intelligent micro controller based technology
• Energy saving modes with comfort
• Variable temperature technology developed dynamic

Specifications:

• Intelligent power saver for AC up to 35 %
• Contact Rating: 30 A heavy duty relay at 230 V AC for Outputs, C/NO output available
• Programme: 1 min. to 16 hrs, Master on/ Cycle on/ Cycle off
• Programme Switches: - 3 no. tactile switches To set PROG, UP ,DN
• Auto / Manual facility with 12 Months Warranty
• Pay back period 4 to 6 months

• Latest HI -TECH Micro Controller Based Technology
• Fully Onsite Programmable, All Set Point Programmable from 4 Keypad.
• Sequencing of AC Equal Run Hours min. 5 minute to 12 hrs. Onsite Selectable.
• Room High Temperature and Low Temperature Alarm Facility Onsite Programmable.
• Temperature Calibration facility Onsite.
• Automatic Override Facility to Second AC.If Running AC Goes Fail
• It Controls 2 Air Conditioners 30–30 AMPS. 2Nos Separate Heavy Duty Relay Output For 2 AC.
• Balance Time Show on Display.
• Separate Phase Supply for each A/C. 
• LCD Display 16 Character and 2 Line with Backlit on Controller front Panel to Read All Parameter and Action of the Controller very Clear at A Time.
• Direct Display Accurate Temperature Sensing by Precise Temperature Sensor.
• Time Sharing for Compressors to share load equally.
• Separate Alarm Relay Contacts for Room High Temperature and Low Temperature.
• Display of all the A/C Parameters continuously ON Display.  
• Various Set Points are Settable through Function Mode Categories.
• It has Password Protection.
• Delay Time Option,
• Auto / Manual Facility for all AC’s. 

• Latest Micro controller based technology
• Programme: on time / off time, real clock time RTC based
• Display continues show real time (Current Clock Time)
• User friendly setting
• Enclosure;-ABS plastic Heavy duty (shock Proof )

Additional Information:

• Production Capacity: 500
• Delivery Time: EX-STOCK

Additional Information:

• Item Code: TT2018
• Pay Mode Terms: Other
• Port of Dispatch: Mumbai- 400078
• Production Capacity: 500
• Delivery Time: EX- STOCK

We are leading manufacturer of AC Guard Digital.

Specification:

• On - Off / Reset :By manual push button
• Heavy duty 30 amps relay output .
• 12 months warranty .

• Green: motor on
• Red: overload
• High: low voltage

Additional Information:

• Production Capacity: 1000
• Delivery Time: EX

• High accurate temperature sensing by precise temperature sensor with pt-100 sensor
• Contact rating 30a at 230v ac for compressor live outputs & 5a at 250v ac for alarm potential free outputs
• Temperature sensor high accuracy and stability pt-100 sensor.
• Resolution 1v for voltage, 1a for currents 0. 1 "c for temperature
• Set Key: to enter into function set mode / to view the next set point
• Up Arrow Key: to increment the set point
• Down Arrow Key: to decrements the set point
• Enter Key: to come out of function set mode /to enter into menu
• Mounting: wall mounting